Ask Experts Questions for FREE Help !
Ask
    shagg1fx's Avatar
    shagg1fx Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 10, 2010, 07:04 PM
    Replaced intake gaket on my 2001 altima and still has the problem
    I replaced the intake gasket on my 2001 altima 2.4 and now the car is shaking even more now
    What went wrong?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Mar 10, 2010, 07:15 PM

    I'm not familiar with your car, but it's very important to torque upper and lower intake manifold bolts in the proper sequence and torque amount (lb.-ft.). Surfaces need to be properly cleaned and new O-rings installed. The work should only be done, while the engine is "stone" cold.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 Nissan Altima [ 7 Answers ]

I have a 2001 Nissan Altima it makes a short (less that a second) hissing noise ever so ofter and when it does the car kind of hesitates or hiccups ever so slightly. Any ideas of the problem?

2001 altima intake manifold gasket [ 2 Answers ]

I have a 2001 Nissan Altima. From what I have read, my rough idle is probably due to a leaking intake manifold gasket. I'm not a car mechanic. I'm I foolish to try to do this myself? I'm also having a problem with driver side power window not going all the way up. Is this the motor or the...

2001 Nissan Altima [ 1 Answers ]

Where is the Fuel Filter in a 2001 Nissan Altma GXE located. Also, will a bad Catalyic Converter cause low miles per gallon.

2001 nissan altima [ 1 Answers ]

Rough idle on 2001 nissan altima. Runs great then seems to fall off, will then regain normal idle speed.

1995 Altima Idleing problem Knock & O2 sensor, EGR Flow Problem [ 1 Answers ]

I have 1995 Nissan Altima with 67,000 miles. When the car is idleing when I start it or when it is at a red light the rpm's go from 6000 to 9000. It sounds like I am reving the engine. The engine sounds fine when I am driving the car ( rpm's are consitent). I went to AutoZone the read out errors...


View more questions Search