Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Plastic connection on copper pipe is leaking how can I fix this
[ 3 Answers ]
I have copper pipe in the house I purchased and noticed a leak the other day at the plastic tee connection on the pipe. I tried to fix it with glue and tape but did not last long, need to cut it out and repair, but can I use flex tubing instead with a plastic tee connector? And how easy is these...
Copper L pipe to black iron pipe
[ 19 Answers ]
Hello This is a natural gas application. Can flexible L copper pipe be coupled to black iron pipe and then buried? I will paint and wrap the black pipe before burial. Thanks Ruko
Galvanized pipe to either Copper/CPVC pipe
[ 14 Answers ]
I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran...
Pipe snapped replacing bathroom sink
[ 3 Answers ]
My cold water pipe snapped behind the shut off valve on the threads inside the wall. I do not know how to weld properly and the main water supply for the whole house is shut off. What do I do? Is it possible to bypass just one bathroom sink and allow water through out the rest of the house? View more questions Search
|