 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I was bleeding the baseboard heaters (and I also want to know if it is normal for only one room out of six w/bb heating, to have bleed valves), but now I cannot get one of the screws to stop water from leaking no matter how tightly I screw on. Can you over tighten these things? I have a feeling...
Previously it was leaking at the top where shower hose goes onto the threads of the pipe at top, I wrapped the threads with teflon tape so that now that part is dry, no leaking, but the hose continues to leak at the bottom (hand held piece). I totally unscrewed the shower hose from the pipe and see...
How to unscrew shower hose to cut the leaking part of hose: I found a crack or tear inside shower card near to end. I've successfully unscrew the shower head, but not able to unscrew the remaining, so that I can cut the damaged part out... it looks like new and shiney, but it's very tightout...
Help! I did a really stupid thing. I forgot to take off the garden hose on the outside water faucet for the winter. I just noticed today that there is a wall of ice/water dripping off the garden hose- not too much though about the size of two icicles. The weather has been above freezing so on...
I had Stanley Steemer to come to my home to clean my carpet. I needed to hook up their machine to my water hose outside only to find out that when they turned on the water hose, water was leaking. Is this a sign that my pipes are busted?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
