Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a 3 way pilot lighted switch
[ 3 Answers ]
I have purchased a 3 way pilot lighted switch to control the garage lights from inside my home. This is to replace an existing 3 way switch. The difference between this switch and a normal 3 way switch is the 4th wire for the nuetral to run the pilot light. I don't have a neutral in this box...
Wiring spst lighted rocker switches to split duplex receptacles
[ 5 Answers ]
Hello, I am looking for help to wire some 16A spst lighted rocker switches to some split duplex receptacles so that each switch will control one outlet on each receptacle. I am doing this to create a panel which will allow me to turn on/off the equipment for my aquarium. This way I can choose...
Hunter fan switch and capacitor wiring connections
[ 1 Answers ]
I need to reconnect a 3-speed fsn switch and a 10/5/5/5 mf capacitor to a Hunter Fan. I foolishly did not record the connections before disconnecting the switch and cap. I found a replacement switch at Home Depot and, from what I found on the web, the connections are L=black, 1=gray, 2=brown,...
Outside thermostat wiring connections
[ 1 Answers ]
Greetings: Replaced a thremostat - it had died but the outside cooling unit stopped working last year. My question is: The thermostat has three wires going out to the outside unit. The old thermostat had two wires wired together - a red one and a green one. The green may not have originally...
A/c float switch wiring connections
[ 1 Answers ]
While working in my attic, I accidentally disconnected one of the eletrical leads from the float switch in my condenser drip pan. Both leads are small gauge, plain black insulate wiring. One lead is still connected to the wiring panel on the side of the hvac unit. The other lead that I kicked... View more questions Search
|