Ask Experts Questions for FREE Help !
Ask
    cadets's Avatar
    cadets Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2010, 03:39 PM
    Rth7600
    We have just installed the RTH7600 it's working fine, but I don't understand the Cool setting - for example, I have the temperature set at 68F and the cool temperature shows 82F is that right or should I lower the 82F to 71F or won't it make any difference as we do not have air conditioning.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Mar 8, 2010, 07:06 PM
    Cool setting only works if you have air conditioning. You needed a heat only thermostat... which could have saved you a bit of money.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell thermostat rth7600 manual [ 2 Answers ]

I currently have a Honeywell T841A1217 and want to install an RTH7600. The wiring labels are different. T841A1217 has W2,X,O,E,G,Y,R. The RTH7600 has C,G,Y,O/B,RC,R,AUX,E,L. The RTH7600 also has C,G,Y,W,RC,R,W2,Y2. I have a 2.5 ton Carrier Heat Pump.

Honeywell RTH7600 thermostat [ 11 Answers ]

I have a honeywell RTH7600 thermostat. The inside temperature on the termostat says it is 4 degrees higher than the room actually is. It says it is 78 degrees and it is actually 74 degrees. Is there a way to calibrate the thermostat to show the true temperature?

Honeywell RTH7600 Battery Free Operation [ 2 Answers ]

Hi, I successfully installed the RTH7600 on my 2 wire Weil McLain, hot water, cold start, gas fired system. I then tried to enable the battery free function by running the system common wire (C on the 28vac transformer) to the "C" terminal on the thermostat. This did not work. Should the common go...

View more questions Search