Ask Experts Questions for FREE Help !
Ask
    jahughes's Avatar
    jahughes Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2010, 08:28 PM
    Dyna-glo ventless gas heaters
    I have a dyna-glo model RMC-40NGT, and the pilot went out. I followed thr relighting instructions, the pilot relit, but when I turned the knob to "on" the pilot went out. HELP! It's cold in here!

Check out some similar questions!

Have a Ventless N/gas Fire logs by SFC Mod# VFST-27VN, It Stopped working no gas [ 0 Answers ]

I have always left the Pilot Flame burning, I tried to use it and pilot Light is out and will not lite, I do not hear any gas noise coming out when trying to light pilot and no Gas noise when I try to hear anything coming out with logs turned on. Any Ideas. I have had the logs for about 5 years. I...

Ventless Gas Fireplace [ 1 Answers ]

My ventless gas fireplace starts up fine, but, recently, the flame has been going out. Even though the flame is set on high and it works fine for a while the flame suddenly shuts off. Please help.

Dyna-Glo Kerosene wick won't stay up [ 4 Answers ]

I have a Dyna-Glo Kerosene (RMC-95-C2) heater, After attempting to change out the wick, I installed raised and it wouldn't lower. So I took it back apart. When I went to raise itagain, It would not. It doesn't click and immediately falls back to extinguished position. I haven't even...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.