Ask Experts Questions for FREE Help !
Ask
    MIDKNIGHT's Avatar
    MIDKNIGHT Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2010, 08:35 PM
    12.5 hp ohv vangard magneto gap
    What is the gap setting for this engine?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Mar 3, 2010, 08:37 PM

    Hey midnight
    That would be .010
    MIDKNIGHT's Avatar
    MIDKNIGHT Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Mar 3, 2010, 08:40 PM
    Quote Originally Posted by dg View Post
    hey midnight
    that would be .010
    Thanks, that's exactly where I set them.:)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Magneto problem [ 1 Answers ]

Have SR130 riding snapper - will not start. Have replaced Magneto - replaced in-line fuse - still not spark

Specifications i.e. spark plug gap,tappet gap hot & cold, air gap [ 1 Answers ]

I need these specs for a briggs & stratton Vanguard 16 hp v-twin ohv engine. Model no 303442.Thank u very much Jan

Riley Nine Magneto [ 1 Answers ]

Hi, Can anyone confirm whether the contact points spark will be visible if the magneto is spun by cranking the engine with the starting handle or is this too slow. Cheers:D

Replacing b&s Magneto [ 5 Answers ]

I have a 5 hp Briggs and stratton with a broken wire on the Magneto close to the winding, the wire that goes to the block ( I assume the Condenser/Points) is also in poor shape. I am looking at changing the magneto, DO I need to remov the flywheel to get at the wire to the condenser or is there a...

View more questions Search