Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Calculate output RPM of an electric motor.
[ 2 Answers ]
If the drive sprocket has a diameter of 4.2 inches, the driven sprocket connected to the gear box has a diameter of 8.7 inches, and the gear box itself has a gear ratio of 50:1. What is the output RPM if the motor is running at 1000 RPM?
Rpm motor out of range
[ 3 Answers ]
Have a carrier weather master and am getting the error message that my rpm motor is out of range.. the heater works if I have it set in emergency mode..
Reducing rpm on drop saw electric motor
[ 1 Answers ]
:eek:Hi, I am wanting to be able to reduce RPM of metal cut off drop saw motor from 4000 rpm to 2000 rpm approximitly. Thanks if you can help.
Need wiring on a condenser motor 1/4hp 1ph 1075 rpm.
[ 4 Answers ]
I have a bad condenser motor and it is an AO smith 1/4hp 1075rpm.The factory motor has only 3 wires a brown purple and black. The wiring diagram shows purple and brown are going to a sep. cap and the black is the line. In the a/c unit the purple goes to the defrost control board and the brown to...
Motor or engine RPM
[ 1 Answers ]
Hello! How to calculate a Motor or an engine RPM while it running? View more questions Search
|