Ask Experts Questions for FREE Help !
Ask
    foxjim's Avatar
    foxjim Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2010, 10:50 AM
    How to set time on hp laserjet 6l
    How do I set correct time on my HP Laserjet 6L printer? My operating system is XP. My printer prints a time but is several hours off.
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
    		  
    #2

    Feb 26, 2010, 07:17 PM

    Some HP printers allow the time to be set from the control panel. The 6L does not appear to be such a model. Additionally, a search did not find any reference to configuring the printer time in the User Manual. If the time being printed is in a page header or footer like would be generated by a web browser when printing, the time used would be the computer's. Adjustment for daylight savings or time zone may need to be made by whatever application you are printing from.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I set the day, time and date on a Seiko World Time Touch sensor [ 5 Answers ]

Setting the date, time and day on a Seiko World Time Touch Sensor with 3 buttons in the back

Directions to set time on Seiko World Time Touch Sensor clock. [ 7 Answers ]

I need directions to set the time on Seiko World Time Touch Sensor clock. RefONS901G. Cal YJ20. The clock has a B C buttons to set time. Thanks, Tom Disregard! I figured it out. Thanks, Tom

Date and time set [ 1 Answers ]

I purchased a honeywell trh 7000 series programmable thermostat. It's the 5-1-1 model. When you first install it you were suppose to set the year and the month but I did not and now it won't let me go back and fix it. How do you reset the date?

How to set up HP Laserjet 6L on XP [ 2 Answers ]

How to set up HP Laserjet 6L on XP . I don't have the installation disk... How to proceed ? Before it worked ( more then 2 years )

Set Blower motor start time? [ 1 Answers ]

Manufacturer = Inter City Furnace Manufacture Date = 1991 Type = Forced air - up draft (house is on a slab) Fuel = Nat Gas The furnace cycles on and off correctly BUT it seems that the blower motor takes a long time to turn on - the flame is burning for maybe a minute(?) before the blower...

View more questions Search