Ask Experts Questions for FREE Help !
Ask
    monkiec's Avatar
    monkiec Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2006, 12:00 AM
    Diverter Stem REplacement
    My home is over 30 years old. I recently purchase new tub/shower handles for an upgrade project. I had no problems until the diverter stem broke. I purchase a diverter stem and it fits except the stem is too short. I cannot find a diverter stem that is the right diameter and length. Is there a such thing as a diverter extension ( not the plastic one, doesn't fit)? HELP
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 11, 2006, 07:33 AM
    Brfore I can help I need the brand name and model number of the faucet. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower diverter stem removal [ 8 Answers ]

I have an unknown brand shower diverter. It's a knob that sits between the hot and cold knob. All three have a knurled end and the stem appears to be made of brass. The stem on the diverter has been "loose" for some type and squeaks when you turn it. Recently, more water now comes from the spigot...

Shower diverter stem removal [ 1 Answers ]

After I get the knob and bonnet off how do I get the stem off? I've already stripped the darn thing and am frustrated.

Shower Diverter pipe stem [ 3 Answers ]

My copper pipe that the Diverter attaches to has deep grooves in it from where the previous installer must have turned the spout while it was tightened on thus causing a deep circular grrove with in the copper pipe itself. My problem is this... when I replaced the diverter spout the new one leaks...

Diverter Stem [ 1 Answers ]

I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF?

Stem replacement [ 3 Answers ]

I replaced the stems in the handles of my bathtub faucet. The cold is fine but the hot water leaks where it is screwed into the pipe. Why? I used plumbers dope on the threads and all the washers and O rings are in place (was done same as the cold) why is it still leaking? Very frustrating. It...

View more questions Search