Check out some similar questions!
How do I locate the stud in a dry wall?
[ 4 Answers ]
I would like to secure a cabinet to a wall (ie it's fairly tall so has an optional support to prevent it from falling over). I understand in most modern houses walls are drywalls (ours was built in 1996 and is Canadian). Should I find a wall stud to attach the fixing to or can I screw straight...
Building a stud wall
[ 4 Answers ]
I recently destroyed one of the walls of my bedroom by taking out all of the lath and plaster, so now it is essentially down to only exposed brick. I want to install a stud wall with insulation and drywall, but the adjacent walls and ceiling are also made of plaster. How should I attach the stud...
Fasten stud wall to concrete basement wall
[ 3 Answers ]
Planning to finishout a basement with stud walls on concrete floor. Planning to use Tapcon fasteners and treated 2x4 for bottom plate. Trying to protect for termites and moisture from the concrete. Thought about using a sill gasket. That would help the moisture but what about termites? I asked...
Stud wall brace required or not
[ 2 Answers ]
We are having a home built and we have 9 to 10 foot ceilings throughout. During framing there were metal strips nailed instead of using the old 2x4 braces. These were done on some of the inside walls but not all of them. It seems that any wall that runs from left to right looking in from the door...
Stud wall: Do I need cross pieces?
[ 6 Answers ]
Just finished part1 of a Honeydo project: Stud wall 20' long with a door near one end. I'll do the drywall next weekend... Currently it's all vertical studs, with the exception of the horizontal above the pre-hung door. I'll be drywalling both sides. Are cross pieces necessary? Thanks! View more questions Search
Add your answer here.
|