Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a flickering light when I turn off the light on my Hampton Bay Fan.
[ 1 Answers ]
I installed a new CFL lightbulb, when I turned on the light I heard a pop and smelled something nasty. Afterwards when I turned off the light all the left over light bulbs constantly flicker. They turn on OK but only flicker when I turn them off. By turning off I mean with the remote, but leaving...
Replaced a bathroom light/ now it won't turn off
[ 4 Answers ]
Just replaced a bathroom light and now it won't turn off. Comeing from the wall were the old light was is 2 white/ 2 black/ and 2 green wires. Can someone please help me figure this very frustating matter.
Fan will not turn on Ceiling fan /light
[ 2 Answers ]
Just bought a house that has a white hampton Bay ceiling fan/light in a bedroom. The light works fine, When you turn on the fan, you can hear the motor running but the blades won't turn. Both light and Fan have separate pull chain switches. My husband just says yea it doesn't work. Ok figured that...
Trun on fan only on my rheem
[ 2 Answers ]
So how do I wire my rheem rgac-08ea so that my fan run independent
Bathroom fan/light: light works, fan doesn't
[ 3 Answers ]
I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes... View more questions Search
|