Ask Experts Questions for FREE Help !
Ask
    lectricdude1's Avatar
    lectricdude1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 22, 2010, 05:05 PM
    I cannot locate a blower connected to my inground spa. I have a single speed 240v pu
    I have an inground spa not working properly. Icannot locate a blower anywhere. I have a single speed pump.where should I look? Can I get a typical plumbing diagram?

Check out some similar questions!

Wiring 240v 3-wire Spa [ 2 Answers ]

I recently hooked up the wiring to a 240v 3-wire spa and I am concerned about the size of the ground wire on the supply line inside the basement from the main panel box to the outside disconnect. This cable is NM-B-6/3-W/G and is protected by a 50 amp breaker in the panel. The disconnect is 60amp...

2 peed blower motor to single speed [ 1 Answers ]

I replaced my furnace blower motor which was a single speed 1750 rpm GE motor with a 2 speed GE motor. How do I get it to run as a single speed motor at the higher rpm (1140/1750)?

Variable Speed vs. Single Speed Blower [ 1 Answers ]

Questions: Getting 2 new heat pump systems installed. 1.5 ton upstairs and 4 ton downstairs. Decided on Comfortmaker. Heat Load calc performed on sizes. Going 2 stage with variable speed downstairs with Honeywell IQ Pro stat. Was going to go one stage with variable speed upstairs with...

Can you upgrade a single speed blower to multispeed? [ 1 Answers ]

To improve circulation and maintain a more uniform temp in the house I'd like to swap out the single speed fan and put in a 2 or even 3 speed fan. Would this be a big project to get the fan to work properly? Would the current control board work? The unit ia a tempstar if that makes a difference

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.