Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement?
[ 3 Answers ]
I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...
How do I hook up a common wire?
[ 5 Answers ]
I am trying to install a Honeywell programmable thermostat with an Equipment Interface Module. The thermostat requires a common wire in order to receive power. The diagram shows only 3 wires going from the thermostat to the module - red, yellow and green. The diagram then shows the module being...
Can you hook up the high speed wire to the medium speed wire on blower fan
[ 20 Answers ]
My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow
How to hook up a heatpump using 8 wire
[ 2 Answers ]
I want to hook up a heatpump with a thermostat that requires lvt 8 wire. What is the right method of making the connections. I don't know how.
Trying to hook up a new Thermostat, quick wire Q
[ 1 Answers ]
Hey Guys! Im new here and I need your help, Im cold and would really appreciate your help, if you can! :) Well about a week ago I was trying to turn my thermostat on because it started to get a bit chilly, but nothing happened, so I went in the basement and seen the pilot was out, so I turned it... View more questions Search
|