Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ink jet cartridge prices
[ 3 Answers ]
So I just went around town to see prices for ink for my Pixma ip4200. Printer cost me $99, ink refill will cost ~$120. I knows I'm not the first to be pissed off at this gauging, I just couldn't but the cartridges, I'd feel so ripped off for some reason. My question is: are there any other option?...
Stem Placement
[ 7 Answers ]
We are replacing the stems on the hot/cold faucets of our 3 handle tub/shower. We have tried placing the stems facing many different directions, but still we can not get the faucets to turn on and off properly. What are we doing wrong? No directions came with the Danco 3S-9H/C stems. Any help...
No Hot Water Pressure in Bathroom Cartridge Faucet
[ 7 Answers ]
I have no hot water pressure in one of my sinks in the Master bath. All other faucets in the bathroom are fine and cold water comes out of the problematic faucet with ease. I have reviewed some of the similar posts and opened up my single handle faucet to clean the cartridge. The cartridge was...
Diverter Stem
[ 1 Answers ]
I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF?
Remove shower cartridge
[ 2 Answers ]
I have a Moen shower control, about 20 years old, no model number evident. The flow, both hot and cold, seems to have gradually diminished. The handle freely moves to both extremes as well as off-on. I tried to remove the cartridge to look for a clog, but couldn't figure out how. I was able to... View more questions Search
|