 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman 18.6 kw furnace has 4 lugs with round fuses 2-40 amp for fan and 2-60 amp for
Coleman 18.6 kw furnace has 4 main lugs for power 2-40 amp round tube fuses 40 amp for fan and 2-60 amp round tube fuses for element what size wire and breakers do I use to wire this thing up the diagraphm is faded away
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I can't seem to locate the filter to change it on a Day & Night Furnace? Two blue panels on the lower front and only the upper panel comes off and that's where the pilot lights and stuff are. I need to change the filter for the air conditioning and it's a combo unit. Thanks, J
Hi, My furnace is around 11 years old and works great, it's built into the bottom of a framed space in the utility room with a large vent above it. Just cleaned it out today, along with all the floor ducts in the house. Vacuumed and dusted the unit itself and installed 2 fresh filters in the...
I need to change my 100 amp service from fuse to breakers. Am I allowed to do this by myself or do I have to have a qualified electrican? - Will hydro ask for one when you tell them that you need the power shut off for a few hrs. while switching over?
Carrier furnace with 4 LED control board 3 amp fuse opens after burner and circulation fan has been on for awhile 26Vac pulls down to 8 volts ac Replaced with 5 amp fuse and it does not open and furnace operation seams normal. Valve control is a White Rodgers 36E What should the resistance of...
Hello, In my house I have an old fuse box that has the old plug fuses. I wanted to know, if I can purchase a replacement type S SL15 amp fuse that acts also as a breaker, you know the one that has a small button in the front that you can reset. If yes, then where would I find them, I looked in...
View more questions Search
|
