 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Easy flush toilet system questions
I purchased a Bur cam easy flush system. I intend to build a platform around the tank lay down a layer of plywood and tile. My question is do I mount the toilet flange to the tank and install plywood, cement backer and tile around the flange or do I lay the plywood first and install the flange over the plywood. In the directions it tells you to mount the flange to the tank and cut the plywood around the flange but it doesn't say anything about if you plan to tile.
|
||||
Check out some similar questions!
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
I noticed my kitchen sink stopped up. Checked both downstairs toilets, one drained fine other didn't. Grabbed the plunger. Plunged the toilet @ North end of house & no results, went to toilet on South end of house no result. Went back to sink, filled up with water & then plunged it. Water went...
Just replace sewage pump for basement bathroom on Sunday, all seems to be working fine. The toilet would not pull the water down/flush.
Hi There, need some experience in this area. For the last several months my r o systems starts running when the toilet is flushed. Sometimes when the well pump comes on, but lately especially when the toilet is flushed. Cause my ro system to run for quite a while. There is no noticeable...
We have 2 toilets and both have the same problem. The first flush does NOT work right and will NOT flush completely, water rises and then goes back down. The second flash works GREAT? We have plunged and clean out all blow or jet holes NOthiNG is plugged? Short of double water bills and the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
