 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace pilot goes out after 24 hours
I have a 1974 mobile home with a international thermo corp furnace mac 1199 / ser #n1199mac71 nov 24-05. We have replaced the thermocouple, valve, and blower - the pilot light- lights and runs for 10 minutes and shuts off for 10 and then runs like that for about 24 hours then the pilot light goes out and blows cold air and will not shut off. I do not have a down draft to blow it out. Do you have any idea what this could be I'm at my "wits end" ! Thank you
|
||||
Check out some similar questions!
My bryant furnace flashes led code 31 and says its locked out for 3 hours will it automatically start working again or try to fire up again or do I have to reset it
Carrier model 58mta 9300TS: The furnace will run sometimes it seems like forever without shutting down.. Furnace was installed 03/2004 it just started acting this way lately I have installed a new digital 2 stage thermostat just last week it still acting up... does not want come out of 1st stage of...
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks
About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
