 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Above ground pool with 4 inch hole in the steel wall.
I had a very small leak in my liner about just under the water line. Over time it created a 4inch diameter hole (rusted) in the wall. The liner is now concaveed and being sucked into the large rusty hole. Can I repair the wall bey draining the pool, drill holes in the wall and bolt a small sheet of stainless steel to the wall. Kind of like howw the skimmer wall is, (stainless steel)?
|
||||
|
||||
|
You can slide in a sheet of galvanized sheet metal between the liner and the pool. You must detach the cap to free up the liner so you can pull the liner well into the pool. A little epoxy and the weight of the water will hold the sheet metal in place. Trim off corners into a small arc and file all edges smooth |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Is there a way to find a hole in a liner of a 27' round above ground pool? The water keeps draining out below the filter basket and on one side I can tell air is under the top of the liner. I've filled it twice, but it drains within a day. I don't see any water outside of the pool anywhere, Help?
I have a 30 year old galvanized steel wall inground pool, Clayton and Lambert. Replaced first liner after 18 years. Small amount of rust at that time which I removed and repainted before new liner went in. Time for another new liner, walls have much more rust now, even a few holes, size of...
I have a leak in the liner of above ground pool. How do I find and patch it? The pool was covered all summer and I wanted to fix air pillow and see there is only few inches water left. I started to fill and saw the soil around one area was getting very wet and summe that is where the leak is. How...
I am looking to purcahse a used pool with a small rip on the bottom of the steel wall. I would like to know if i could seam this area like the original seam from the manufacture?
My husband whole mowing threw a rock that put a small hole in the outside of our above ground pool. It did not penetrate the lining but we are afraid it may by the jagged edge. How can we fix the hole?
View more questions Search
|
