Ask Experts Questions for FREE Help !
Ask
    benk999's Avatar
    benk999 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 16, 2010, 07:49 AM
    Furnace the heil quaker
    Have and old Heil Quaker furnace. Need a replacement heating element.
    Can you help please.The model is NEBA029AKAPO

    Thank you.

    Ben
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 16, 2010, 07:57 AM
    Usually exact replacement heaters are not available for old units. Below is an example of a type of kit most repair people use for this purpose. NOTE I said example. You will have to find out what you exactly need for the watts/btu requirement of the one you are replacing. All this info is on the defective heater or listed on the furnace. Good luck.

    NEW DH500 RESTRING KIT FOR ELECTRIC FURNACES 5KW 5000W - eBay (item 250382482475 end time Feb-25-10 04:41:25 PST)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

Heil Quaker furnace installed in 1968 [ 6 Answers ]

Where can I find an installation/owners/parts manual?

Heil/Quaker Furnace [ 2 Answers ]

I have a residential, natural gas furnace made by Heil/Quaker. The following is printed on the door sticker: HQCO Lavergne, TN Model: NUGE060KG02-867-768011 Serial: L880717696 Mfr #: NUGE060KG02 Trying to find an owner's/installation/operation manual for this furnace. I believe it is...

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

View more questions Search