Ask Experts Questions for FREE Help !
Ask
    NMkahuna's Avatar
    NMkahuna Posts: 3, Reputation: 1
    New Member
     
    #1

    Feb 14, 2010, 03:57 PM
    I replaced the filter in my Janitrol heater, now the unit doesn't lite or go on.
    I changed the filter in our Janitrol heater, now it won't light.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Feb 14, 2010, 04:01 PM
    Double check,make sure you have the door/cover in place correctly
    NMkahuna's Avatar
    NMkahuna Posts: 3, Reputation: 1
    New Member
     
    #3

    Feb 14, 2010, 05:40 PM
    Quote Originally Posted by wmproop View Post
    double check,make sure you have the door/cover in place correctly
    Thanks for the suggestion but that didn't fix it.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #4

    Feb 14, 2010, 05:55 PM

    If you removed any of the access panels to change the filter, check for any wires that may have become disconnected.
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #5

    Feb 14, 2010, 06:41 PM

    Check to see if the fuse is blown on the board in the blower compartment
    NMkahuna's Avatar
    NMkahuna Posts: 3, Reputation: 1
    New Member
     
    #6

    Feb 14, 2010, 09:04 PM

    Yes, it was a wire that had come loose. THANKS to all who responded! NMKAHUNA OUT

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heater shuts down in cold weather-replaced heater does it again [ 4 Answers ]

3 years ago our heater would shut off in lower temperatures. We replaced the heater on advice from a heater and airconditioner repair company , a few weeks later it happened again. Every winter since then it will shut down in the evening and early am and continue until the temp get higher. We...

Changing ACC Cabin Filter & Marker Lite Bulb [ 0 Answers ]

1. What steps do I need to take in order to change the ACC (Hepa) Cabin Filter (Particulate Filter) on a 2005 Buick Century? 2. Also, how do I go about changing the bulb on the left front side marker lite on same 2005 Buick Century? Appreciate the feedback!

Pump won't lite after cleaning filter and inner filter [ 1 Answers ]

Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...

Replaced thermocouple furnace still won't stay lite [ 2 Answers ]

Our furnace was pushing out cold air, my husband replaced the thermocouple and now the furnace will lite, then about 20 seconds later the light will go out and the whole furnace will stop working. It is a Coleman forced heat. Please give us some help


View more questions Search