Ask Experts Questions for FREE Help !
Ask
    Donzi's Avatar
    Donzi Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 13, 2010, 05:54 PM
    Angle Stop
    Have you heard of an angle stop with a plastic knob that you should pull for water shut off to the fixture? My Mother has these in her house and can't seem to pull them out for water shut off.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Feb 13, 2010, 10:08 PM

    See the image below is this your mom's angle valve looks like?

    John
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

T-connector to angle stop [ 2 Answers ]

Is it possible to connect a T-connector to the ACCOR, one piece angle stop

Angle stop with PEX [ 8 Answers ]

I would like the easiest route from a standard angle stop to a copper pipe (then to PEX). This is for a toilet supply. I would like to use a standard angle stop and screw it to a copper pipe, and use Shark Bite or Watts quick-connect to connect it to the PEX. I want to avoid using another...

Angle stop leaking [ 3 Answers ]

I recently installed new "fill valve & flapper" to my toilet. Basically all of the insides of the toilet. It was leaking at the bottom of the toilet so I added a washer wich fixed that leak, but now it leaks at the angle stop. I bought some teflon tape to use to try to use at the connection of...

Installing angle-stop [ 3 Answers ]

I need to replace my angle-stops for my kitchen sink. Never done it before. It seems easy, but I want to make sure before I do it, that I'm doing it correctly. Appreciate it, in advance.

Angle stop [ 3 Answers ]

What is a standard 1/2" compression angle stop? I am installing a sink faucet supply line


View more questions Search