 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I am in the process of trying to determine the cause of extremely low water pressure and flow rate from my well. The well has a submersible pump (3/4 hp I believe from what I read on the control unit). The pump was working fine then during a week or so the pressure dropped significantly. I'm not...
I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...
I purchased a price pfister shower kit and it did not have an installation manual. They are closed today and their website does not have manuals on it. I just need to know how to install the valve. Can some one direct me to a site that will give me that info?
New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in...
Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
