 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dryer turns on. Then needs to cool off before working again
We own a Kenmore Elite Dryer. It is almost 10 years old. When I turn it on there is a loud buzzing sound before turning on. After the cycle completes it needs to cool down before I can put in a second load. There is also a slight burning smell. What do you think is the problem? Should I replair or replace?
|
||||
Check out some similar questions!
Hi, I have a old Kenmore gas dryer series 80. My wife found out the heat just started about 20seconds, then it stopped. I checked it from back, I saw the flame came on, then goes out I tried to relight a couple of times with no success. Please help for this problem. Thanks Yan
When I start the dryer on any heat level and timed drying, everything turns on as usual. After 5 minutes the flames turns off and never comes back on. If I turn off the dryer and start it again, I hear a click and the igniter turns on, glows and turns off before the gas comes through, then glows...
When dryer cycle is time set for 60 minutes of drying time, the machine turns off before the clothes are dry. The timer moves as required and the timer has been replaced. This is an intermittent problem.
I have a Kenmore Elite gas dryer Model 11074992300. At first the dryer would run but there was no heat. Now the dryer will only run when the start button is pressed, as soon as it's released it stops running and still no heat. Does anyone know what it will need to be repaired?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
