Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Luxaire Furnace Model #G9F08016UPC13C
[ 2 Answers ]
Blower works, filter is clean. Hot Surface Ignitor glows, burners ignite for 15 seconds, then cuts out. This cycle happens for (3) times. Fault code then blinks (7) times. According to book it means one of (3) things: a) low gas pressure (however my other furnace works fine), b) faulty gas...
Luxaire furnace Model# G9T08012UPB13C
[ 2 Answers ]
6 years old. Blower runs, ignitor glows, natural gas valve clicks but no flame. Blower remains on ignitor glows & cycles 3 times but never fires. Is it the ignitor (not hot enough) or the control valve? I've got a Simpson meter but don't know what values I'm looking for.I had same problem with a...
Luxaire model bata-f036ad
[ 2 Answers ]
How can I find out what the ton rating is on this unit? I bought it used and they didn't know.
Luxaire model bata-f036ad
[ 1 Answers ]
I need to find specs on this unit I bought it used and need to know what the BTU ratings are
Luxaire furnace
[ 1 Answers ]
My furnace cuts in and out far too often and my furnace will cut in and blow nothing but cold air. The red trouble shooting light flashes 8 times meaning "lockout caused by loss of flame" Any ideas why either of these situations happen?:confused: I have put in a new flame sensor as well as a... View more questions Search
|