Ask Experts Questions for FREE Help !
Ask
    shaileshc's Avatar
    shaileshc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2010, 06:05 AM
    Effects of entrapped air in a closed loop chilled water system
    Hi all,

    Could anybody tell me the effects of an entrapped air in the chilled water closed loop system.

    Shailesh.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Feb 12, 2010, 09:54 AM

    Depending on the amount of air, the most obvious effect(s) would be poor or no circulation, noise, and poor performance.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Closed loop Chilled water system - pressurisation units [ 18 Answers ]

Hi all , I am new to this site... Could you please some one help me out to locate the pressurization unit for a chilled water system application in 120m tower building. The heat exchangers/CHW pumps are located at 0.0 level... System volume is about 35-40 m3 and pump head is around 4 bar... ...

Threeway control valve location closed loop chilled water system [ 2 Answers ]

Hi all, I am new to this site. Anybody could help me about exact location of threeway control valve in closed loop chilled water system for process cooling. I have doubt about the location, in the inlet of the heatexchanger or out let of the exchanger? Kindly help me. Regards, Sivam

Closed loop chilled water pressurization unit [ 3 Answers ]

Dear sir: I want to know how can I calculate the head of pressurization pump,flow rate of pressurization pump and size of expansion tank Regards

Hot water pipes bang on closed loop boiler system [ 1 Answers ]

I have a Smith GV100W Propane Gas Boiler that is 13 years old. I getting a loud hot water pipe banging at the beginning of the cycle before the boiler comes. The gauge on the boiler shows less than 10lbs pressure currently. The hot water baseboard heating works fine except for this. I...

Closed loop hot water heat [ 4 Answers ]

40+ year old system. EFM oil boiler. Circulating pump has been leaking at shaft, then when running, sounded funny, thought pump was not working, partially working. Got taco pump; then found pressure regulator not letting any water through. Well pump supplies cold water to boiler for domestic, and...

View more questions Search