 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I cleaned the ignitor and the first burner lights, for a few seconds then shuts off
The fan is running, I changed the position of the ignitor and got the flame to stay lit and the furnace is running; but it will run until therm temp setting is met then will turn off like normal. But when it fires up again, the flame will not stay lit. I cleaned the ignitor and temporarily removed the filter at it was dirty. Could the ignitor need replacing even when it is glowing?
|
||||
Check out some similar questions!
I have my furnace set at 69 and it only shuts down for about 10 seconds. Is that normal? I've changed the filter regularly. The only other thing I can think of is if the cold air return vents are partially blocked, would this be starving the furnace and causing it to continue?
I had a new Weather King Furnace installed approx 18 months ago and a new climate technology thermostat as well. This is really the first time I've had to use the heater. The Furnace comes on for approx 30 seconds and shuts off. The A/C unit works fine. Any suggestions?:(
I have just moved into a new apartment and the showers in both bathrooms have not worked properly since I moved in. 1. In the primary bathroom the cold water comes out in a trickle for both the tub faucet and the shower head. Maintenance has been over and even replaced the "seat" but did not make...
My furnace will lite for few seconds then shuts off. How do I trouble shoot this. I have a rheem model # rgpn
Yesterday, our A/C shut off and would not come back on. It shows on the digital thermostat that the fan is blowing cool (two different icons that appear and move) but the unit is NOT on. After leaving it off for the afternoon, my husband was able to turn it back on, but this lasted 30 seconds...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
