 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Remove old tub cartridge
I have a moen tub faucet and it's likely 30 years old. I can't get it out. I have a cartridge puller but on my model there is a stainless front piece with 2 protrusions that the handle fit over to control temperature range(?). So the cartridge puller does not work. This is a singel handle system with no diverter. The diverter is on the spout. I've tried pulling with needlenose but can't seem to get enough of a grip and am worried I will damage the plumbing in the wall. Any suggestions?
|
||||
Check out some similar questions!
Hi folks, I have a single handle Moen tub faucet that I'm trying to do some work on. A little description first. My bathtub faucet is teardrop shaped with the point of the teardrop pointing towards the floor. So when looking at it the writing is actually upside down. So to turn on the water...
No ht water in kitchen sink or dishwasher.. how do you remove the cartridge in the faucet.. I've removed the areator already.
I have a HP7410 All in one printer for about 3 years (No Warranty). Recently replaced the color cartridge, now I keep getting the message "Remove and check color cartridge", I have done that even bought another cartridge only to have the same problem. Any ideas?
I have a Moen shower control, about 20 years old, no model number evident. The flow, both hot and cold, seems to have gradually diminished. The handle freely moves to both extremes as well as off-on. I tried to remove the cartridge to look for a clog, but couldn't figure out how. I was able to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
