 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
ge washing machine transmission mounts
We have a very unstable spin cycle. Drum is always off balance regardless of load adjustments. The mounts on the bottom of the washer supporting the whole drum transmission assembly are loose and we are not sure if they should be loose. Two especially are very very loose and the whole assembly rocks from corner to corner and throws the washer forward into the room while on the spin cycle. The machine also makes random loud thumping noises while spinning.
What should the mounts on the bottom of the machine look like? Should they be tight or allow movement, and how much? We have a cracked belt as well. Any advice? The model # is WWA8310GALWH Serial is H2903234G I took a video of the movement of the mounting plates. Not sure how to upload it, though. |
||||
Check out some similar questions!
My hot water automatic shut-off valve on my washing machine started gushing water. So I figured no problem, I would turn off the water at the in-wall manual shut off valve for the washing machine. But even when I turn it all the way off, it leaks. It leaks into the hose going to the washing...
I have a Kenmore washing machine (11020092993) that wasn't spinning. I took it apart and found that the coupler was broken. Before I found the problem I had already taken the 3 bolts out that hold the transmission to the bottom. The transmission dropped about an inch but wouldn't come off the...
When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
