Ask Experts Questions for FREE Help !
Ask
    sngpizzuto's Avatar
    sngpizzuto Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 7, 2010, 09:13 AM
    Honeywell heating zone valves does not open
    I installed a honeywell zone valve.It won't open in the manual position.I did not wire it yet.What's wrong with the valve?
    sngpizzuto's Avatar
    sngpizzuto Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Feb 7, 2010, 09:15 AM

    Honeywell zone valve does not open
    sngpizzuto's Avatar
    sngpizzuto Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 7, 2010, 09:16 AM
    Quote Originally Posted by sngpizzuto View Post
    honeywell zone valve does not open
    I put a brand new zone valve.it's not wired yet and does not open in the Manual position
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Feb 7, 2010, 11:34 AM
    Never heard of that before. Was it a solder in valve?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell zone valve seems stuck open [ 19 Answers ]

I manually opened one of my home's five Honeywell zone valves (V8043E-1012) by mistake. I meant to open a different valve. The one I opened had its thermostat set to its lowest temp setting, as it controls heat to a space I hardly ever heat. The next day the valve was still in the open position...

45 year old zone valves( honeywell) [ 5 Answers ]

At home (in Belgium) we have a oil burning heating system installed in 1964, up till now the system is still working(several burners have been placed and replaced) The thermostats ( mercury) and the zone valves are Honeywell and still original and working fine. Now I want to place hour counters...

Are zone valves or zone thermostats possible with a steam boiler? [ 1 Answers ]

I have an old 4 story building with one thermostat controlling the steam heat to all floors. There is a commercial space on the ground floor and they are complaining that they don't get enough heat sometimes (and on occasion get too much!) They have suggested that there is some way to place a...

Zone heating. One zone won't turn furnace on. [ 3 Answers ]

Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...

Zone valves [ 2 Answers ]

Looking for a wiring diagram for a new dunkirk boiler . Just the diagram for the 3 zone valves. Company says that the boiler transformer is enough to run three zones ( 24v) . Or do I need to add transformer. Just can't figure out the wiring from one zone valve to another. Contacts on each zone are...

View more questions Search