Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you match the drain of shower stall to basement drain when they do not line up
[ 3 Answers ]
I want to place a new shower stall in my basement.Right now my shower is just open drain with shower curtain.My problem is how to match the new stall with old drain.The stall has precut drain.My old drain is off about 2 feet off.Thanks
Moving shower drain 12 inches concrete
[ 1 Answers ]
I am remodeling my bathroom off my family room that has a slab concrete with a crawl under my house the drain needs to move about 12 inches back to fit a pre fab shower kit I bought. Of course I will have to bust up the concrete to make a small run of pvc to the existing drain hole, will this be a...
4 Inches off prebuilt shower base drain
[ 4 Answers ]
Hello, I an so novice. I just bought a $500.00 shower kit. The whole in the base does not fit the drain in my floor. It's a concrete floor. 1st floor. Its off by 5 inches. Does this mean I will need to hire someone to dig up the concrete for 5 inches and redrain. That is going to cost money I...
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Standing Shower Drain Leaks
[ 3 Answers ]
Hi: I read few articles about how to fix the shower drain leaks. I guess some experts suggested to use WingTite. I think the rubber gasket and the threaded top cover is what is causing the leak. The threaded holder seems a bit bigger than the hole of the shower drain itself and I don't know how... View more questions Search
|