Replaced both vanity faucets, now nothing comes from hot in tub

Check out some similar questions!

My corner tub and vanity are pulling from the wall [ 3 Answers ]

I noticed that my tub and vanity which are on the same outside wall attached to each other are pulling away from the wall, with about a 1/4 inch space or more on the vanity and a 1/8 inch or so gap downward from the recently redone caulk on the tub. The house is about 14 years old. Never used this...

Bath Tub Leaky Faucets [ 1 Answers ]

I replaced the bathtub faucets (they have never been replaced). Install the same measurements of Stem and seat. I have a continuous leak (dripping). Oh by the way the deviator does not have a seat, however there is a seat installed in pipe. Can you help?

Installin tub faucets [ 1 Answers ]

I can not install the deverter knob in my tub correctly. When I turn the hot and cold water and then turn it to the shower there is water still going down the drain and not enough to the shower.

Leaky Tub faucets [ 1 Answers ]

I need to know what makes the valves inside the hot and cold handles on a tub leak.. Then how do I remove the stems and make sure they are still sealled correctly? I know to turn water off.. I just want to know how to back out the stems and explore for damage or replacement vaulves?

Tub faucets [ 1 Answers ]

I am trying to get the estuechon(flared shell) off tub faucets to replace the washers on the valve stems. They are threaded on and have corroded so badly that I cannot turn them to remove so I can get to the valves. Does anyone have ideas on how I might get these off without tearing them to...

View more questions Search

Check out some similar questions!

Add your answer here.