Ask Experts Questions for FREE Help !
Ask
    dwaynedavis5061's Avatar
    dwaynedavis5061 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2010, 01:25 PM
    Intertherm furnace parts
    What is the rocker switch called that you can turn it on auto or manual and controls the thermostat?
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #2

    Feb 5, 2010, 01:58 PM

    Hi! dwaynedavis5061, welcome to AMHD :)

    Check here:
    mobilehomerepair.com/NordyneGas

    Its alphabetical scroll down to switches.

    Here's the manuals page:
    hvacmanuals.com/
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace parts [ 1 Answers ]

I have replaced our themostat three different times. This winter, but come to find out it is the switch that makes the fan turn on manual or auto there seems to be 4 wire connecting to it. You have to bump it sometimes to make it come on . It looks like a rocker switch to me what exactly is it...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 6 Answers ]

Hi I have a Intertherm Model MMHA 070ABHr-01 gas. Had a tech out replaced the ignitor/and adjusted it. Problem still is furnace calls for heat prepurge fan motor kicks?? In, ignites runs for 2-3 minutes kicks out fan motor starts runs for 30 sec shuts off. In the mean time the furnace has...

Intertherm furnace [ 2 Answers ]

I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank....

View more questions Search