Ask Experts Questions for FREE Help !
Ask
    bdaddy300z's Avatar
    bdaddy300z Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 3, 2010, 02:50 PM
    Rheem model 81v52d
    Once I replace the lower element in my water heater how do I properly bleed air out so upper element doesn't burn out?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Feb 3, 2010, 02:59 PM

    Open the hot side of your faucets and let it run until the water flows good, Thanks.

    John
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Feb 3, 2010, 04:23 PM

    Yep, its as simple as that. Turn on any hot water fuacet in the house until all air is bled out and you get a good stream of water. then you can turn power back on to water heater.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem Model 81V52D Water Heater [ 20 Answers ]

My water heater seemed to be running out of hot water sooner that normal. Since the elements have never been replaced , I thought this might be the problem. So I shut off the power, cut off the water supply to the heater and shut off the valve from the heater to the house. I connected a hose the...

Rheem Model RCBA 2457GG14 [ 3 Answers ]

Where is the filter located in this model (RCBA 2457GG14)?

Hot Water Heater, Rheem, Model RHGPRO40-40 Maintenance Manual, Download [ 2 Answers ]

I do not have an owner's manual for my Rheem RHGPRO40-40 gas hot water heater. I purchased it in December, the year 2000. I want instructions on how to properly drain the tank to keep rust and other particles from impairing the heater's ability to function properly. How long do I drain it? Do I...

Rheem hot water heater model# 81V52D [ 1 Answers ]

This morning there was no hot water and I checked the circuit beaker and it had been trip to off position. I turned the beaker to on position, smoke started coming from where the Main electric wire that runs down into the top of the water heater, then the water heater trip the beaker back to the...

Fan limit settings for a RHEEM Gas Furnace Model 3214-100FB [ 1 Answers ]

I have a RHEEM Gas Furnace Model 3214-100FB. My problem is that when the heat shuts off the fan keeps moving until all the hot air is removed from the vents. The fan then continues to blow until the house becomes cool again, which then causes the heat to have to come back on. What are the proper...


View more questions Search