 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem gas hot water heater won't ignite
I have a Rheem gas hot water heater near about 12 years old. About a year ago I replaced the igniter. Now at times the vent will come on and the gas won't ignite - if I turn the power switch off wait a few seconds turn back on everything works fine - glow plug works, fire lites, we get hot water. This might work a day or two, then I hear the power vent on and no fire - turn off turn back on works fine. Any answers?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Why has my question had 56 views and no answers :( Am I supposed to be paying someone? I thought this was free. Help. Below is my question: I don't think my ignitor has a flame sensor, but it may be incorporated. It is a round ignitor. White on the bottom with a black spiral heating...
Rheem hot water heater gas. How to reset error codes. Eco code.
My heater has a hot surface ignitor. Ignitor kicks on - gas kicks on - gas lights - quickly goes out. Pulled wires on vacuum switch and put back. Works now - ignitor kicks on - gas kicks on - gas lights - quickly goes out - gas kicks back on quickly and stays lit. Is something wrong? ...
Our gas hot water heater started leaking last week and we found the leak and repaired it. However, now we are smelling gas in the laundry room. Our question is once you relight the pilot light on a gas water heater, do you leave the dial on pilot or do you turn it to on?
I have a rheem rfd200-76-1 gas water heater that is not working. The pilot light is on but the main burners do not kick on unless you jiggle the vent damper on top. I was told that you can bypass this damper and just run it off the thermastat. How can I get this to work? Where do I find the...
View more questions Search
|
