Ask Experts Questions for FREE Help !
Ask
    mmh1130's Avatar
    mmh1130 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 2, 2010, 11:04 AM
    Sump pit sizing
    If flow to a sump pit is 25 gpm,what should be the size(lengthxbreadthxdepth) of the sump pit? Any code reference?

Check out some similar questions!

Sump pump pit? [ 4 Answers ]

Thank you for looking at my question. I have a sump pump in the basement and I decided to try to clean the pit. When I drained most of the water I started to poke around to see what kind of bottom there was. That's when I noticed that the bottom seems to be of concrete and so are the walls. The...

Sump pit NEVER fills [ 5 Answers ]

Should I be concerned that my sump pit has not filled with water during intense storms? We have been hammered with heavy rain. There is no basement water damage but there has been water against my foundation wall, due to a grading issue. Thanks

Sump pit vs sewage pit [ 2 Answers ]

We are putting a new bath in our basement. We have an existing sump pit for laundry that is about 18" deep. I don't think it is deep enough for a sewage pump. Do we need to tear it out and put in a sewage pit?

Drain tile and sump pit and pump [ 3 Answers ]

Can anyone be more specific as to install drain tile and sump pit. Like how deep should I dig down around inside of foundation.How far from the foundation walls. Should I come out and how far from the wall should I place the pipe. Can I use 4 in plastic flex pipe? Should the concrete be cut with...

Venting Basement Sump Pit [ 1 Answers ]

First a little background. I'm finishing a bathroom in my basement that was roughed in while the house was being built. I have a sump-pit that needs to be vented. Due to hvac and plumbing obstructions, I will need to extend the plumber provided vent pipe from the floor above a few inches below...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.