Ask Experts Questions for FREE Help !
Ask
    diyser's Avatar
    diyser Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 30, 2010, 11:34 PM
    Wire a fan/heater/light
    After wiring my fan/heater/light my heater won't work with the light turned on yet my fan will work with my light on. I can turn my light off and my heater works. What did I do wrong? Oh yeah this was just a remove old one and replace with a new one.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Jan 31, 2010, 10:16 AM
    You wired it wrong. Without you telling us what wires the combo unit has and what wires are feeding it, I can't tell you anything more. Need to know how you are switching it, powering it and what wiring is available to it.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Jan 31, 2010, 04:16 PM

    First read the installation instructions.
    Did you do anything at the switch box?
    Chances are that they are set up to prevent the fan and heater operating at the same time. If they did, you would only blow hot air out the exhaust.

    Move the wire that is presently connected to the light to the fan. Move the wire presently connected to the fan to the light. You light should always work but the fan would only work if the heater in not on and the heater should work if the fan is not on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting two wires from light kit pull chain switch 2 wire to light kit for fan [ 6 Answers ]

I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...

How to wire a Ceiling fan light 3-way and fan separately [ 2 Answers ]

Hello, I am trying to wire my ceiling fan light to two 3-way switches and my fan to a separate switch. I have the power source 14-2 running to the ceiling box, a 14-3 cable running from switch box 2, (3-way switch), to the ceiling box and another 14-3 cable running from the ceiling box to switch...

Where does this wire go?In a ceiling fan light [ 10 Answers ]

Ok this has probably been answered. But I have not read all the posts/ I just found this sight while researching what I am about to ask.. I have wired three ceiling fans to plug in to wall receptacles.. as there are no wire to hard wire them in in my home and I am poor and cannot afford an...

Replacing light/fan with light/fan/heater [ 1 Answers ]

Is is possible? Right now we just have a light and a fan. I was wonder if I could put a heater in there as well.

Trying to wire in fan and light control [ 1 Answers ]

:confused: I purchased the hunter ceiling fan and light control for my hunter fan.I'm having problems installing the unit to the existing wires in the wall.There are 3 white wires that are togther,there are two black wire together , then there is a black wire by itself and of course the ground wire...


View more questions Search