Ask Experts Questions for FREE Help !
Ask
    lah013's Avatar
    lah013 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2010, 09:12 PM
    What would cause my radio to squeal and then cut out? Light s and buttons work fine
    My 2003 Honda Accord radio makes a loud squealing noise and then goes out. The lights and buttons work fine.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Jan 30, 2010, 09:14 PM

    Check the rear speakers to see if something in the trunk has disturbed the wiring and shorting against the speaker metal.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #3

    Feb 4, 2010, 08:52 PM

    How did things work out?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #4

    Feb 5, 2010, 06:54 AM

    The radio's internal ampifier may have failed. The only way to verify the fault would be to swap your radio into another car that doesn't have a problem and that radio into your car. See what happens...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Legalities of neighbors to turn my water off to work in their home/cut walls to work? [ 9 Answers ]

My downstairs neighbor moved in 2 years ago. It seems like they don't realize we live in a 2 story condo not a custom home. One top another bottom. There are other questions I wish to ask as well. But first the male occupant is a handy man and has been doing lots of modifications to his home since...

Buttons on radio in Dodge minivan doesn't always work [ 0 Answers ]

I own a 2001 dodge minivan. When I'm driving along my radio/cdplayer buttons will no longer work. I can't adjust the volume, turn it off etc. When I start the car later it works fine for a few minutes then it no longer works. What is wrong?

Maytag gas dryer light are on but won't start when buttons are pushed [ 2 Answers ]

HI, I have a maytag MGD 5500 AWW dryer (gas). In the last year we have replaced the motor and the control panel. Worked fine a few days ago. Ongoing problem is it beeps for now reason, no lights come on it just starts beeping... then will stop on it own. Today when I went to dry a load of...

Kenmore he3 dryer buttons don't work [ 2 Answers ]

I have a kenmore he3 dryer. The drum light comes on when you open the door, but nothing else works. When you push a button on the control panel no lights light up, nothing. I am thinking that it may be a bad control board but would really appreciate some input on this matter if someone else has had...

Kenmore Dishwasher 16509200 - buttons won't work [ 1 Answers ]

We have a Kenmore Dishwasher, model #16509200, and it's worked perfect until about 3 months ago, the buttons no longer work. I tried it Christmas day and it worked great, but when I tried it the next day, none of the buttons would work. This morning, I pushed the Air Dry button for 4 seconds just...

View more questions Search