Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Hot dimmer switches
 [ 5 Answers ]
 I work in a new commercial building and the overhead can lights and ceiling fans are controlled by dimmer switches. The metal switch plates get hot enough to be uncomfortable to touch. When I taped them off to prevent use until the contractor could look at them the glue on the back of the tape... 
Dimmer switches
 [ 1 Answers ]
 How can you stop the dimmer switch from causing the loud ringing noise when it is engaged? 
3-way switches: toggle vs.  Dimmer
 [ 1 Answers ]
 I have a set of lights controlled by two (3-way) toggle switches. I want to be able to dim these lights. Can I just buy two 3-way dimmers? Will they be able to be dimmed from either switch? 
Dimmer switches
 [ 1 Answers ]
 I have two dimmer switches with built in night lights on the toggle portion of switch. I noticed that both night lights started to flicker, otherwise the switch and lights work normal. Will the night light just go out eventually or do I need to replace them due to any possible dangers. ... 
Dimmer Switches
 [ 1 Answers ]
 
Hi I got new diva dimmer switches installed today by a licensed electrician. Does anybody know if when they are in the off position I am supposed to see a light behind the actual switch? I was just wondering if they were installed correctly. Please help. Amy View more questions Search 
  |