Ask Experts Questions for FREE Help !
Ask
    pkruff's Avatar
    pkruff Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2010, 05:14 AM
    Furnace lock out for 3 hours will it come back automatically
    My bryant furnace flashes led code 31 and says its locked out for 3 hours will it automatically start working again or try to fire up again or do I have to reset it
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 30, 2010, 07:38 AM
    Try killing the power at the breaker box for a minute and turning it back on,most of the time this works, but you need to find out why the furnace didn`t work right and went into lockdown, it will probably do it again
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I have a cell lock automatically once a format is applied to it? [ 1 Answers ]

I have an spreadsheet that I am working on. I have set up Macros buttons that when selected will changed the color(format) of the cell to correspond however once the cell is changed(formatted) I want to cell to lock automatically so that it can't be changed? Is this an available option for excel?

Carrier Furnace will not Start automatically [ 1 Answers ]

We have a Carrier furnace that is 5 years old, the thermostat is set for 23 degrees, and the temperature is sitting at 19 degrees. The furnace quite often will not kick in, if I open the door of the furnace and manually hold the switch it sometimes kicks in with the first try; however I normally...

Furnace Does Not Turn on Automatically [ 33 Answers ]

Sometimes when I have the furnace set on automatic it will not turn on when the temperature goes below the set point. All I have to do in order for it to work again is turn the furnace off then back on (I do this at the thermostat) and it will work fine for a day or two, then the same thing happens...

Changed Thermostat will not automatically turn Furnace on [ 1 Answers ]

We changed our old honeywell thermostat (with mercury) to an updated honeywell thermostat (with no mercury) CT87K. After we changed the thermostat the furnace will not automatically kick on and it actually shut off so we had to hit the reset button. The furnace at times now will turn of if we put...

Furnace does not shut off automatically [ 1 Answers ]

I have an Intertherm #FEH-015HA furnace in my mobile home. The furnace seems to be producing ample amount of heat but when it reaches the desired temperature, it does not shut off. I thought it was a thermostat problem so I replaced that but it still does not shut off. The only way I can get it to...

View more questions Search