 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We have broken part of the outside of a shower tray which we believe is fibre glass. We have been told you can buy a bath repair kit that would do the job. Has anyone any information on this problem. John
Hello I plan on building a tile shower on an concrete slab with drain already in place (there was an existing show in place) which sticks up about an inch from the slab (possibly there is a piece I can remove to bring the drain back down below slab level). The walls will be 2x4 stud and I'm...
How do I remove part of the old drain assembly that has been glued to the drain pipe that comes up from the slab floor.
Hi all, am pretty handy but currently could use some advice. A new rectangular shower kit arrived, glass doors, tray and all but upon lining the tray up to the studs, cutting the floor below to refit the drain and its trap I find the shower tray drain lines up exactly on the top of a floor joist. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
