Ask Experts Questions for FREE Help !
Ask
    wookman66's Avatar
    wookman66 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2010, 10:36 AM
    Where is the pressure switch located on a gooman furnace
    Where can I find the pressure switch on the goodman furnace modil gmt090-3
    wookman66's Avatar
    wookman66 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 25, 2010, 10:38 AM

    Where is the pressure switch located on a goodman furnace modil gmt090-3
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Jan 25, 2010, 10:52 AM
    Usually close to the top, rubber hose attached runs from pressure switch to the inducer housing
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Where is the high limit switch located on a Trane XR80 furnace [ 1 Answers ]

I was told by a Trane technician that either my high limit switch or the fan relay was causing my problems. The relay is on the control board, but where is the high limit switch

Where is the high limit switch located on a Trane XR80 furnace [ 1 Answers ]

My furnace kicks the burner off when the fan starts. After 30 seconds the burner comes back on and then it runs through its cycle pretty much like it's supposed to. I was told by a Trane technician that it could either be the control panel orthe high limit switch. Where is the high limit switch...

Where is pressure switch located [ 1 Answers ]

My pressure switch is open, how do I reset it?

How to change DIP Switch Settings on a Gooman Air Handler [ 1 Answers ]

I have a Goodman AEPF 183016 air handler. How do I change the DIP swishes to add CPM? The product specifications state that you can speed up the fan using the #7 dip switch. Where are the DIP Switches?

View more questions Search