 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
He260a humidifier
I have purchased a Honeywell HE260A to replace an older drum humidifier. Besides the transformer and the H8908A humidistat that came with the basic unit, do I need to install a current sensing switch or sail switch to make this work? Or do I just need the humidstat? All the instructions are for multiple models (as are the wiring instructions) and it is not clear from them what I need to do to get this to work.
I did not buy the installation kit the Lowe's is selling since I already have the damper & vent hose from my old humidifier |
||||
Check out some similar questions!
Instlled Honeywell humidifier HE260A. Water runs constantly across the filter pad. Does not shut down at any point. Is there a problem with the solinoid or some other problem? Thanks
I see on my split HVAC system control board that there is a terminal labeled HUM for humidifier hookup. My question is, does the other lead go to the 24volt COM?
Where can I find filters for my older Kenmore Humidifier model #758-144522
Hello everyone - I have a humidifier question - actually a few. This will be my second winter in my house. We have a natural gas furnace. There is no humidifier. I've noticed a small amount of condensation on the windows, and therefore assume I don't have a need for a humidifier. However, my...
Got a new Cleanaire humidifier with 24 volts input and have problem to find 24 volts feed from furnace. Is there any way to get 24 volt from furnace without using 120 to 24 volts transformer. Thanks in advance. :confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
