 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washing machine won't cycle
Kenmore series 80 heavy duty top loader will not cycle properly, it will stop after the washing cycle and we have to reset the timer knob (pull out then push in) to start it again. Could it be the timer (bad switch)? Once we do that it will go into it's next cyle OK.
|
||||
Check out some similar questions!
Our 25 yr old kenmore C1104430081 has presented it's first problem!. once the complete wash cyle is over water continues to drip (very slowly) into the tub... wondering if the solenoid shut off mechanism is faulty... any comments or other suspicions gratefully requested.
I have a Kenmore clothes washer model 417.29042991 (10 years old) that makes a LOUD intermittent ratcheting sound during spin cycle. Any ideas? Thanks, Dale
My Kenmore washer will go through the wash cylce but when it reaches the spin cycle the water will drain out but will not spin out. I did replace the motor isolation cupling, but that did not take care of the problem. I'm thinking that the control magnet could be the culprit. Any thoughts?? LAJ
My Kenmore 80 Series washing machine is 4 yrs old. It fills like it should but when it gets to a certain level for a large load, it starts to drain while its still filling. The water keeps filling and draining leaving it stranded in that cycle. If I change the load size to medium, it works fine....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
