Ask Experts Questions for FREE Help !
Ask
    cjones1956's Avatar
    cjones1956 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2006, 08:27 PM
    Hampton bay remote light
    After installing our hampton bay ceiling fan I noticed that when we first turn on the light, either via the wall switch or the remote, it is slow to come on. It starts dim an then goes to bright.

    My wife and I prefer for the light to come on immediately.

    My questions are:

    1. Is this by design?

    2. If so, can it be changed to light immediately?

    Thanks

    CJ
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 3, 2006, 11:28 PM
    I'm sorry to say:

    1. I don't know. I would go back to the store and ask them to show you a display and see if it does the same thing. I've never encountered it.

    2. No.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Dec 3, 2006, 11:28 PM
    Additional thought: maybe the "dim" button is stuck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Fan Light Remote Problems [ 8 Answers ]

I have a Hampton Bay Redington II Pinnacle Fan with light kit. It was installed a few years ago, and the fan works fine, but the light has never worked with the remote. The store replaced the remote, but this one doesn't work either. We can turn the light on and off with the wall switch, but...

Hampton Bay Ceiling Fan remote light issues [ 3 Answers ]

Hello, I just recently purchased a Hampton Bay 54' sidewinder ceiling fan/light from homedepot.com, and had it installed by a general contractor. The wall remote functioned perfectly until yesterday. While we were trying to dim the lights yesterday, we noticed some flickering, then the light went...

Hampton Bay remote doesn't turn on light [ 8 Answers ]

I am in need of assistance, if possible. I recently bought a Hampton Bay Windward II ceiling fan from Home Depot. I installed the fan according to the instructions. With the wall switch turned "on", the fan light comes on and the fan begins spinning; however, the remote will operate the fan and all...

Hampton bay fan remote works the speed not light [ 3 Answers ]

I installed this fan OK... it was fine for 2.5 years now the remote only works the fan speed. It does not work the lights. I removed the fan and checked connections which are good.Luckily the fans lights are in the on position and POWER is through a wall switch,that controls the lights. But I wish...

Hampton Bay Remote Won't Completely Turn Off Light [ 2 Answers ]

Hi, I just purchased two Hampton Bay Ceiling Fan Remotes (Transmitter/Receiver). Model: 191-707. I wired one up in my living room and the other in the kitchen. I was able to turn my lights on/off and my fan too. They worked great or so I thought. When it got dark out I noticed that with the...

View more questions Search