Ask Experts Questions for FREE Help !
Ask
    jessgamez's Avatar
    jessgamez Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2010, 05:59 AM
    Where is the Blower Motor resistor in a mazda 626?
    Where is the Blower Motor resistor in a mazda 626?
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #2

    Jan 24, 2010, 06:41 AM
    Hi! jessgamez, welcome to AMHD :)

    Quote Originally Posted by jessgamez View Post
    Where is the Blower Motor resistor in a mazda 626?
    The resistor is screwed to the bottom or side of the blower motor.

    That should be behind your glove box.
    Open it, squeeze the sides in and lower it to gain access to the screws... probably won't have to take it all the way out.

    Use the attached pdf to check for continuity

    If your handy, and they fit you could solder in new ones.
    Keep the resistance values the same, just buy higher wattage resistors.

    The amperage that the blower pulls, should be stamped on the motor. I imagine you will need quite heavy duty resistors around 50 watt capability.

    If not handy, and depending on the year, part runs between $40 - $80 USD

    k
    Attached Images
  1. File Type: pdf 626Resistor.pdf (73.0 KB, 635 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor resistor [ 2 Answers ]

I have a 2003 Chevy Malibu, the blower for heating and air conditioning only blows on setting 4 and 5. I called my Chevy dealer and was told that the blower motor resistor needed to be replaced. How much should this cost and could I replace it myself? Thank you.

2000 Chevy Venture blower motor resistor [ 1 Answers ]

I am having problems changing out my blower motor resistor on my 2000 Chevy Venture. I saw articles about where to find it, but I can't seem to find articles on how to do it. I can not get to the three nuts that are holding the resistor to the blower. One of the nuts/screws in directly behind...

Change a blower motor resistor [ 3 Answers ]

Hey guys, I was hoping someone here knew how to change a blower motor resistor on a 2000 chevy venture? This will be my second one to go and I don't want to pay $100 if it is easy enough to change myself. What do you think. Any ideas? Thanks for the info in advance.

View more questions Search