Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rth221b diythermostats.honeywell.com
[ 2 Answers ]
I'm connecting my new thermostat with two wires, one red and one white. When connecting the red wire does it go directly in the rh slot along with the jumper that is already in place? I had it set up this way and my heat would not come on. I put the old thermostat back up and it worked fine. Any...
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Replaceing honeywell 3210d thermostat with hunter 44668 thermostat
[ 0 Answers ]
Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.
How do I wire my new honeywell thermostat replacing the old tempstar thermostat?
[ 1 Answers ]
I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...
Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D
[ 1 Answers ]
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on... View more questions Search
|