Check out some similar questions!
Bryant gas furnace starts OK - but blower stops after a few minutes
[ 1 Answers ]
My Bryant gas furnace (394GAD I think) starts up in heating cycle OK - but after a few minutes the blower shuts off. The burners stay on. Then 30 seconds or so later, the blower restarts. After a few minutes, it shuts off again - burners still on - then starts again after 30 seconds. Repeats this...
Furnace Blower Stops During Heating Cycle
[ 1 Answers ]
Hi! You all are my last hope. I have a 13 year old Nordyne furnace. Last week the fan stopped blowing during the heating cycle. It would wait about 15 seconds and then come back on and a slight hot smell would be blown from the registers. I called a repairman and he put on a new fan limit...
Kenmore Gas Dryer Stops Heating
[ 1 Answers ]
We have a Kenmore gas dryer #110.74642400 that is driving me crazy. The burner will heat and cycle for about 5 minutes in either timed or auto settings but the burner will stay off. I have checked the 3 thermostats with a ohmmeter and they checked OK. The ignitor was replaced as a " shot in the...
Main blower sometimes starts and stops in Gas Furnace
[ 3 Answers ]
Hi, I got a problem with main blower in gas furnace. I've checked this site, but didn't find an answer. Symptoms: Sometimes it starts and stops when burns work or don't start at all. Relay clicks to start blower in 30 seconds after burner started, but blower doesn't start or stops and then...
Only in AM, gas furnace stops and starts
[ 1 Answers ]
Hello I have a Gaffers-Sattler furnace, about 40 years old. Runs great, but for one problem. In the morning around 5 or 6, I turn on furnace and it will heat up and run for about 5 to 6 minutes then stop for about 3 minutes and repeat this all morning long. (frustration as this is when its... View more questions Search
Add your answer here.
|