Ask Experts Questions for FREE Help !
Ask
    DO YOU CHARGE A CALL OUT's Avatar
    DO YOU CHARGE A CALL OUT Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2006, 03:11 PM
    Whirlpool Dishwasher Adp 7966
    Yo, Got A Wpl Adp7966 D/w Punter Says Showing Error Code F7 And Won't Start Up. Going On Saturday And Would Be Nice To Know What F7 Is?
    ;)
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Nov 25, 2006, 09:18 AM
    Sup ghee:

    Yo model isn't giving me no info on the whirlpool website, you sure got da right one?

    Peace out :)
    DO YOU CHARGE A CALL OUT's Avatar
    DO YOU CHARGE A CALL OUT Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Nov 25, 2006, 01:36 PM
    Quote Originally Posted by andrewcocke
    sup ghee:

    yo model aint givin me no info on the whirlpool website, you sure got da right one?

    peace out :)

    Hi there pal, thanks for trying to help but i have it sorted now. i'm an ex zanussi engineer and not done much on these crap wpl's
    Stay cool dude:d :d :d
    Julie Evans's Avatar
    Julie Evans Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Dec 3, 2006, 07:52 AM
    Hello, what was the fault. I've got the same machine showing the same fault?
    DO YOU CHARGE A CALL OUT's Avatar
    DO YOU CHARGE A CALL OUT Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Dec 3, 2006, 12:25 PM
    Hi, the machine was in flood situation. Water had leaked into the base and caused the float to trip. Tip the machine backwards a little and see if water runs out of the bottom and if so it may well be a leaking circulation motor that's caused it. Once the base is clear of water it will work again but only for a wash or two till its repaired.
    big george's Avatar
    big george Posts: 2, Reputation: 1
    New Member
    		  
    #6

    Aug 7, 2008, 11:26 PM
    Quote Originally Posted by DO YOU CHARGE A CALL OUT
    Yo, Got A Wpl Adp7966 D/w Punter Says Showing Error Code F7 And Wont Start Up. Going On Saturday And Would Be Nice To Know What F7 Is ??
    ;)
    Hi did you ever find out what code F7 is - we have the same problem! It empties and fills etc but makes a clicking noise when you would normally hear the motor!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New dishwasher [ 4 Answers ]

Hi Rather new to this I'm afraid so please excuse me for being a little blonde. I live in a rented house and the landlords dishwasher went wrong recently so he had it removed but not replaced. Have managed to get a 2nd hand one but no instructions with it (DOH! ) Anyway this new one has 2 pipes...

Dishwasher hookup [ 7 Answers ]

Installed a brand new dishwasher recently. Put a t connection off the hot water pipe that goes to the kitchen sink. However water that is going to the dishwasher is cold. Have pulled the dishwasher out to make sure that we hooked into the hot water and it is definitely the hot water pipe. Any...

Dishwasher [ 1 Answers ]

My Whirlpool Quiet Partner 1 always has water on the indside door when I unload it. My silverware basket is in the door, so my utensils are wet. Is this a defect in the dishwasher or is my drain line responsible? My dishwasher is only 6 months old!

Dishwasher door [ 5 Answers ]

I installed a new GE Tall Tub dishwasher, but now a few weeks later I cannot get the door to open after setting it to wash the di. There is no apparent blockage, but I do not know what to try first.

View more questions Search