Ask Experts Questions for FREE Help !
Ask
    kayla711's Avatar
    kayla711 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2006, 09:41 AM
    Kenmore Washer clicking and failing mid-cycle
    My Kenmore 90 Series Heavy Duty Super Capacity Plus (mod # 11020902990) is roughly 7 years old. No problems until today when mid-cyle it started clicking loudly, and will not do anything else. The washer is full of clothing and water. I can't get it to drain, rinse, spin, etc. When it first happened, I tried turning the dial to different cycles, but nothing would happen. Several minutes later, I tried again, and the clicking resumes on all cycle attempts, but still nothing happening.
    Thanks in advance for any help I can get.
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Dec 3, 2006, 09:42 AM
    Where is this clicking coming from?
    kayla711's Avatar
    kayla711 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 3, 2006, 09:45 AM
    I don't know... how do I tell? The only thing I have notice, if this helps, is the drain hose jiggles when the clicking is happening. Maybe something is blocked?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer - heats & runs but stops mid-cycle [ 12 Answers ]

I have been trying to figure out what exactly is up with our Kenmore dryer. We bought it new in 1997 and it has run like a champ till now. It still heats up and the drum still tumbles. In the regular drying cycle - you set the timer for 60 minutes and about 15 minutes into the cycle, the dryer...

Kenmore washer won't spin, clicking [ 17 Answers ]

We have a relatively new (3 years or so) Kenmore Elite washer. It has been having the same problem on and off for a few weeks now. The washer will agitate during the wash and rinse cycles, but stops when it gets to the spin cycle. It just sits there full of water from the rinse, and emits a foul...

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Kenmore Washer Won't Complete Spin Cycle [ 0 Answers ]

Hi, I have a Kenmore 110.4549290 that will agitate, and even will spin up to and including the start of the rinse cycle. It then drains the first rinse water, puts in a couple cups of water, but does not go into the rest of the spin cycle. The timer can be heard running (quietly), and it shuts...

View more questions Search